CHAUVET PRO WELL-COM-V2 Wireless - Chauvet Professional WELL-COM-V2 Wireless DMX Controller LED

CHAUVET PRO WELL-COM-V2 Wireless - Chauvet Professional WELL-COM-V2 Wireless DMX Controller LEDWireless interface to contro W DMX enabled lights from a smartphone or a tablet. The WELL Com V2 Wireless DMX Controller from CHAUVET PROFESSIONAL allows you to control your W DMX lights from a smartphone or tablet from distances up to 656'. For venues such as theaters, traditional wired DMX for console control can also use the full 512 channels. Among the controller's many features are 18 scenes available for playback and 24 steps per scene with

114 dB (CCIR) Signal-to-Noise Ratio 12dB (A) Maximum Input Sound Level 134dB SPL Power Requirements Phantom Power 48V +/- 4V Output Impedance 100 Ohms Output Connectors Custom 5-pin to dual 3-pin XLR output cable (included) Pad No Low Frequency Roll-Off No Dimensions 5

You can even use the H2n as a multi-purpose USB microphone

Microphone Type Boundary Sound Field Mono Polar Pattern Cardioid

the cable will not carry phantom power to the microphone

4 channels Input/output ratings   DATA/DATA+PoE connectors   Connector RJ-45 Transmission protocol Dante Gigabit Ethernet standard 1000BASE-T (IEEE 802

Locks on to charger

Line Input: XLR-1/4" combo + 1/8" TRS

The hardware enables the mixers to mount into any 12-space (or more)

5 ADDED FREQUENCY POINTS FOR GREATER FLEXIBILITY

plywood with EVCoat Grille 18 AWG steel with powdercoat Height 26

and the most adaptable shockmount around - the 4400a is pure modern classic

+6dBu (when Ref