Thompson Center TC Encore, Impact, Omega, Strike, Triumph and Pro Hunter Alloy Light Weight Ring Base Combination (xxx724 series) Select Color:Silver Anodized

Thompson Center TC Encore, Impact, Omega, Strike, Triumph and Pro Hunter Alloy Light Weight Ring Base Combination (xxx724 series) Select Color:Silver AnodizedLow . 565", Medium . 665", High . 765", Ex High . 865" as measured from the closest contact point at the receiver to the bottom of the ring cradle We recommend the Extended Version for the Pro Hunter or for the other models in this series if you want extra eye relief. The extended version places the scope forward toward the muzzle by about 1 inch more as compared to the non extended version. The Medium Height is the most popular height when using a

278” to Center Bore or

Note: Browning made several versions of the B78 with the Octagonal Barrel and perhaps with the Round Barrel as well

that is not the common way to use this ring

252760 for 0

Front Ring Height as  measured from the closest contact point at the receiver to the bottom of the rings cradle

Need to ensure the mounting begins in the front (lightly screw in the front two screws) attach the rear two screws and torque them to no more than 25 inch-lbs then go back and torque the front screws to the same

Don't be concerned

for receivers drilled and tapped for four standard 6-48 screws

This extended option is typically used for rifles with a longer action and / or a scope with a shorter tube

7707” from base to bottom of the ring bed

4857” from base to bottom of the ring bed

330 Rear Mount Hole Spacing for